因为装了个优化大师,建议我刷bios,能提高性能,我就到HP网站下载个bios,一看还是挺新版的,就直接运行了。运行期间,显示共8项要刷新,其中,有一条提示我 part ID 与新版的bios不一样,要不要继续执行?我想也没想就继续执行(因为我想让机器跑得更好些嘛)。执行到第八项时,唰的一下关机,并重启。从此,就起不来了。按F2也进不去,按哪个键都不管用,什么F10呀或 Fn 呀等等。软驱也没动静,光驱好像有动静,但是我把XP盘放进去,也是呼呼转了几下就没有了下文。现在真是束手无策。
顺便说一下,我用的是windows下的刷新。
哪位高人见了这贴,请高抬贵手,给点建议吧。
(我曾打电话给HP技术中心,由于过了质保期,要收45元服务,这都没什么,关键是它是通过电话指导,而且还说 No guarantee,叫我如何放心的了。)
曾下载它的技术说明,关于bios部分属于第三方的技术支持,操作起来也很是麻烦,可行性很低。
本人是菜鸟一个,略知皮毛。我发誓以后再也不会没事去刷笔记本的bios了。台式机的还简单些。
Repairing the BIOS IC
(Service Partners Only)
The notebook’s BIOS IC cannot be replaced separately. If it is defective, you must replace the
motherboard. In some cases, however, you might be able to reprogram a malfunctioning BIOS IC
using either e-DiagTools for Windows, a BIOS floppy disk, or a Crisis Recovery floppy disk.
If the notebook will boot sufficiently, use e-DiagTools for Windows or a BIOS floppy disk to reprogram
the BIOS IC. If you cannot boot the notebook adequately, use a Crisis Recovery floppy disk. See below
for instructions for all 3 methods.
carl_sun : 2007-02-08#5
Using a BIOS Floppy Disk
If you do not have a BIOS floppy disk, download the package from the Partnership Web site (see page vii)
under Product Support Information in the Service and Support Library. Follow the instructions for creating
the BIOS floppy disk.
CAUTION: Make sure to use the correct BIOS floppy disk for the notebook model you are
repairing.
The program does not verify the notebook model, so you could accidentally install the
wrong BIOS.
1. Insert the BIOS floppy disk in the floppy disk drive.
2. Turn on the notebook and allow it to boot from the BIOS floppy disk.
If the notebook does not turn on at all, do the following to boot from the BIOS floppy disk:
a. Unplug the AC adapter.
b. Press and hold Fn+B.
c. Plug in the AC adapter.
d. Release Fn+B.
NOTE: If the notebook will not boot from the BIOS floppy disk, try plugging the boot-block jumper
into the notebook’s parallel port. See the wiring diagram below.
3. The display goes blank for a minute or more while the BIOS is reprogrammed.
NOTE: If you plugged in a boot block jumper, unplug it before the notebook automatically reboots.
4. After the BIOS reprograms itself, check the BIOS version to make sure it is the latest version.
If necessary, download the latest BIOS version and reprogram the BIOS IC.
14
1
25
13
Figure 2-41. Boot-Block Jumper