车钥匙换电池后遥控不好使，网上找方法重新写好后，原来好使的第二把钥匙又不好使了

[kaskan]

怎么能两把一起都写好呢，肯定不是对一把操作的时候第二把带在身上就行那么简单，谁知道请教一下，谢谢
toyota corolla ce 2011

 

[eleclan]

怎么能两把一起都写好呢，肯定不是对一把操作的时候第二把带在身上就行那么简单，谁知道请教一下，谢谢
toyota corolla ce 2011

找DEALER

 

[kaskan]

找DEALER

自己解决了，thanks

方法
Begin with: The driver's door open and unlocked. Key out of the ignition.

1. Insert and remove the key from the ignition switch 2 times within 5 seconds.

NOTE: Steps 2 and 3 should be performed within 40 seconds.

2. Close and open driver's door TWICE.

3. Insert the key into the ignition and remove it.

NOTE: Steps 4 - 6 should be performed within 40 seconds.

4. Close and open the driver's door twice.

5. Insert the key into the ignition.

6. Close the door.

NOTE: Steps 5 and 6 should be reversed for the following models ONLY (close door first, then insert key into ignition):

2000 - 2005 Celica

2001 - 2003 Prius

2001 - 2005 ECHO

2001 - 2005 RAV4

2003 - 2004 Avalon

7. Turn the ignition switch from "Lock" to "On" and back to "Lock" at about 1 second intervals to select the desired mode:

1 time for ADD mode.

2 times for REWRITE mode.

3 times for CONFIRMATION mode.

5 times for PROHIBITION mode.

8. Remove the key from the ignition.

9. To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a number of times corresponding to your key cycles in step 7.

NOTE: If Confirmation or Prohibition modes have been selected, opening the door will complete the procedure.

10. For Add or Rewrite modes do the following within 40 seconds of Door

Procedure Lock confirmation:

A. Press both car transmitter Lock and Unlock buttons simultaneously between 1 and 1.5 seconds and release.

B. Within 3 seconds of step A, press the transmitter Lock button for more than 1 second and release.

If the keyless entry remote transmitter has been successfully programmed, the power locks will cycle "lock" to "unlock" once at this time.

If there are problems with the remote transmitter or the procedure up to this point, the locks will cycle twice. If this occurs, verify that you have received the correct transmitter, and then repeat the above procedure.

C. If multiple remotes are to be reprogrammed, repeat steps A and B.

11. Open the driver's door to conclude programming mode.

Please also watch the video below to learn about Toyota keyless remote programming

 

[~snowwolf~]

自己解决了，thanks

方法
Begin with: The driver's door open and unlocked. Key out of the ignition.

1. Insert and remove the key from the ignition switch 2 times within 5 seconds.

NOTE: Steps 2 and 3 should be performed within 40 seconds.

2. Close and open driver's door TWICE.

3. Insert the key into the ignition and remove it.

NOTE: Steps 4 - 6 should be performed within 40 seconds.

4. Close and open the driver's door twice.

5. Insert the key into the ignition.

6. Close the door.

NOTE: Steps 5 and 6 should be reversed for the following models ONLY (close door first, then insert key into ignition):

2000 - 2005 Celica

2001 - 2003 Prius

2001 - 2005 ECHO

2001 - 2005 RAV4

2003 - 2004 Avalon

7. Turn the ignition switch from "Lock" to "On" and back to "Lock" at about 1 second intervals to select the desired mode:

1 time for ADD mode.

2 times for REWRITE mode.

3 times for CONFIRMATION mode.

5 times for PROHIBITION mode.

8. Remove the key from the ignition.

9. To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a number of times corresponding to your key cycles in step 7.

NOTE: If Confirmation or Prohibition modes have been selected, opening the door will complete the procedure.

10. For Add or Rewrite modes do the following within 40 seconds of Door

Procedure Lock confirmation:

A. Press both car transmitter Lock and Unlock buttons simultaneously between 1 and 1.5 seconds and release.

B. Within 3 seconds of step A, press the transmitter Lock button for more than 1 second and release.

If the keyless entry remote transmitter has been successfully programmed, the power locks will cycle "lock" to "unlock" once at this time.

If there are problems with the remote transmitter or the procedure up to this point, the locks will cycle twice. If this occurs, verify that you have received the correct transmitter, and then repeat the above procedure.

C. If multiple remotes are to be reprogrammed, repeat steps A and B.

11. Open the driver's door to conclude programming mode.

Please also watch the video below to learn about Toyota keyless remote programming

好贴，赞?

 

[kaskan]

避免这些,重要的是,fob换电池的时候速度要快,据说要在40秒之内,这样存在芯片里的秘码就不会消失